DIY Installation
Install Yourself and Save
ECONOMY WALLING SYSTEM
Our high quality precast walls easy to install yourself resulting in savings for you!
These panels have a unique design that ensures that they fit together neatly. No grouting is required between panels.They have a pattern on one side and are plain on the reverse side.
Prices
​
Wall Panels $2700 each
5 ft High Posts $3900 each
6 ft High Posts $4200 each
7 ft High Posts $4500 each
8 ft High Posts $4700 each
​
ALL PRICES ARE EX MANDEVILLE AND EXCLUDE DELIVERY
Installation Guide
-
Start by digging the foundation for an end or corner post
-
Install the post. Make sure it is online, vertical and correctly orientated. Measure the desired height of the wall from the top of the post and make a mark on the post at ground level. Set the post height accordingly. Pour concrete.
-
Measure the distance between posts (1900mm c/c) and dig the foundation for the second post.
-
Now place a panel into the slot of the first post at ground level.
-
Place the second post in it's foundation hole. Maneuver it into place so that the panel fits into the groove. Set the height of the post.
-
Pour concrete to secure the second post. Make sure it is online, vertical and correctly orientated.
-
Now level the panel and set it at ground level.
-
Place concrete under the two ends of the panel to secure it.
-
Repeat the above steps until the wall is completed with one panel at ground level between all the posts.
-
Now insert the remaining panels from the top of the wall.
-
Grout the join between the posts and panels if desired.
Specification
Foundation size
450mm x 450mm x 600mm
1' 6" x 1' 6" x 2'
Foundation size depends on ground conditions. Adapt as necessary.
​
Panel Dimensions
300mm x 1800mm x 40mm
1' x 6' x 11/2"
​
Post dimensions
100mm x 100mm x length
4" x 4" x length
​
Use 5ft long posts for 3ft high wall
Use 6 ft long posts for 4 ft high wall
Use 7 ft long posts for 5ft high wall
Use 8ft long posts for 6ft high wall
​
Reinforcing
Panels are reinforced with 3 x 6.3mm corrugated steel
Posts are reinforced with 4 x 10mm corrugated steel
​
Concrete
Concrete components are weigh-batched and machine mixed. Compressive strength is 40Mpa.
​
​